How to Use Hydraulic Crimper Tool?

Here are the steps of using hydraulic crimping tool.
1. Put the dies in
2. Turn the knob to the end of the "on" direction

3. Press the handle repeatedly to move the dies
4. Put terminal in and keep pressing the handle until the terminal is swaged enough

5. Turn the knob to the "off" direction to release the pressure

Note: It is important to crimp twice on different positions for each terminal and make sure the cable is firm enough. Otherwise, the cable might get loose some days later. You definitely don't want that happen since it will be a hassle to rebuild the whole project.